Operating the Throttle
The throttle control moves between F
AST
and S
LOW
positions
).
Always use the F
AST
position when engaging the mower
blades with the blade-control switch (PTO).
G008946
Figure 12
Operating the Ignition Switch
Important:
Do not engage the starter for more than
5 seconds at a time. If the engine fails to start, wait
15 seconds between attempts. Failure to follow these
instructions can burn out the starter motor.
Note:
You may need to repeat the cycle for starting the
engine when you start it for the first time after you have filled
a completely empty fuel system with fuel.
Figure 13
Figure 14
Using the Fuel-Shutoff Valve
Close the fuel-shutoff valve for transport, maintenance, and
storage (
Ensure that the fuel-shutoff valve is open when starting the
engine.
Figure 15
1.
O
N
position
2.
O
FF
position
17
Summary of Contents for 74513
Page 60: ...Schematics Electrical Schematic Rev A 60 ...
Page 61: ...Notes ...
Page 62: ...Notes ...
Page 63: ...Notes ...
