Toro 74513, Operator'S Manual

Page: 21 / 64

Figure 21
Driving Backward
1. Move both motion-control levers to the center,
unlocked position.
2. Slowly pull the motion-control levers rearward ( Figure
22 ).
Figure 22
Stopping the Machine
To stop the machine, move the motion-control levers
to neutral, move both motion-control levers into the
N
EUTRAL
-
LOCK
position, disengage the power takeoff
(PTO), and turn the ignition key to the O
FF
position.
Set the parking brake when you leave the machine; refer to
Setting the Parking Brake (page 16) .
Note:
Remember to remove the key from the ignition switch.
CAUTION
Children or bystanders may be injured if they move
or attempt to operate the machine.
Always remove the ignition key and set the parking
brake when leaving the machine unattended.
Pushing the Machine by Hand
The bypass valves allow you to push the machine by hand
without the engine running.
Important:
Always push the machine by hand. Do not
tow the machine, because hydraulic damage may occur.
Important:
Do not start or operate the machine with
the bypass valves open. Damage to system may occur.
Figure 23
21