1
Assembling the Machine
Parts needed for this procedure:
1
Tiller assembly
1
Handlebar assembly
1
Handlebar tube
2
Wheel
1
Lower pulley guard
1
Pulley guard plate
1
Drag stake
1
Bolt (M8 x 85 mm)
2
Bolt (M6 x 65 mm)
2
Bolt (M8 x 16 mm)
4
Bolt (M6 x 14 mm)
1
Nut (M8)
4
Nut (M6)
4
Screw
2
Pin
1
Lock pin
Procedure
1.
Remove the loose parts from the top of the box.
2.
Close the box, turn it upside-down, and cut it
open at the corners.
3.
Cut, remove, and discard the rectangle shown
on both sides of the foam.
g361865
Figure 3
1.
Cut here.
4.
Remove the wheels.
g361871
Figure 4
5.
Assemble the pulley guards.
g361864
Figure 5
1.
Screw (4)
3.
Lower pulley guard
2.
Pulley guard plate
6.
Install the guards to the tiller assembly.
g361866
Figure 6
1.
Bolt—M6 x 14 mm (4)
2.
Nut—M6 (2)
7
