7.
For each wheel, slide in the pin and secure the
wheel with the bolt.
g361868
Figure 7
1.
Bolt—M8 x 16 mm (2)
2.
Pin (2)
8.
Turn the machine over and remove the foam.
9.
Install the handlebar tube as follows:
A.
Rotate the spreader bolt clockwise.
g361872
Figure 8
1.
Spreader bolt
B.
Insert the handlebar tube into the red
bracket and secure it as shown.
g361867
Figure 9
1.
Nut (M8)
3.
Bolt (M8 x 85 mm)
2.
Handlebar tube
C.
Remove and discard the spreader bolt.
D.
Tighten the fasteners until the handlebar
tube is snug.
10.
On the handlebar assembly, connect the cables
to the drive levers if they are not attached.
g361873
Figure 10
1.
Rear drive lever cable
2.
Front drive lever cable
8
