3.
Connect the 3 brushes using the connection
plates.
g346862
Figure 5
1.
Locknut—M10 (4)
3.
Large washer (4)
2.
Connection plate
4.
Bolt—M10 x 50 (4)
4.
Install the chain shackle to one of the eyelets.
g363237
Figure 6
1.
Chain shackle
5.
Thread the rope through the chain shackle.
6.
Use the rope to secure the attachment to the
hitch on the traction unit. Ensure that the
traction unit is not supporting the weight of the
attachment (i.e., the attachment is not hanging
from the rope).
Note:
If there is no hitch, refer to the
Operator’s
Manual
of the traction unit to determine the
preferred attachment point.
g347378
Figure 7
5
Summary of Contents for 46402AA
Page 9: ...Notes ...
Page 10: ...Notes ...
