Toro 44931, Operator'S Manual

Page: 31 / 60

Operating Instructions Page 25
Belt start
Belt stop
Reduce belt speed
Increase belt speed
Belt Reverse
Store/Recall presets
Lower Bin
Raise Bin
Option start
Option stop
Reduce option speed
Increase option speed
All Stop
W
ARNING
:
Do not leave the MH-400
unattended while it is running.
Turn on the control pendant by rotating the “
all stop
”
button clockwise until it pops up.
Conveyor Belt
•
To unload the MH-400, press the “
belt start”
button
on the control pendant. This moves material to the
rear along the conveyor belt.
•
To stop the conveyor belt, press the “
belt stop”
button on the control pendant.
•
To load the MH-400, press and hold the “
belt
reverse”
button on the control pendant. (Belt must
be stopped in order to reverse) This moves material
to the front along the conveyor belt.
Bin Raise/Lower
•
To raise the MH-400, press and hold the “
raise bin”
button on the control pendant until the desired height
is reached, then release it.
•
To lower the MH-400, press and hold the “
lower
bin”
button on the control pendant until the desired
height is reached, then release it.
C
AUTION
:
Do not keep pressing the
“
raise bin
”/”
lower bin
” buttons in the
raised or lowered position once the lift
cylinders have reached their maximum
travel position.