Toro 41622, Installation Instructions Manual

Page: 3 / 20

Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Eductor valve assembly 1
Flange nut (1/4 inch) 2
Fitting (1 inch) 1
Retainer pins 1
Eductor valve bracket (The bracket may
already be installed from a previous kit
installation)
1
Relief hose (10 3/4 inches) 1
Supply hose (18 1/2 inches)
1
1
Bypass hose (12 inches) 1
Install the eductor valve and hoses.
Support frame assembly 1
Locknut (3/8 inch) 1
Back plate assembly 1
Cradle arm, right 1
Cradle arm, left 1
Bushing 2
Pivot pin 2
Jam nut (3/8 inch) 2
Handle 2
Bolt (3/8 x 1-1/4 inches)
2
Set screw 2
Hair pin 2
2
Flat washer 2
Assemble the frame.
3
Spring 2 Install the latching components.
Eductor 1
Handle 1
Flange-head bolt 2
Spring clamp 1
Bolt (#10-24 x 1/2 inch) 2
Locknut (#10-24) 2
Bolt (3/8 x 1 inch) 4
Locknut (3/8 inch) 4
Flange-head nut 2
Hex-head bolt 3
Latch post 1
Latch handle 1
T-valve 1
Gasket 1
4
Worm-screw clamp 1
Install the eductor.
3