12
Description
Use
Qty.
Hold-down brackets
2
Installing the attachment hold-down brackets.
Radiator cover
Radiator panel
Bolts, 3/8 x 1 inch
Bolts, 1/4 x 3/4 inch
1
1
4
3
Installing the radiator cover.
Tank and skid assembly
Clevis pins
Lynch pins
Bolts, 1/2 x 1-1/2 inch
Washers, 1/2 inc
Nuts, 1/2 inch
1
2
4
2
4
2
Installing the tank skid.
Knob
J–clips
Bolt, 1/4 x 3/4 inch
Flange nut, 1/4 inch
1
3
1
1
Installing the control box.
Boom holder assembly, left
Boom holder assembly, right
1
1
Installing the boom holders.
Operator’s Manual
1
Read before operating the machine.
Operator’s Video
1
Watch before operating the machine.
Parts Catalog
1
Use for ordering replacement parts.
Selection Guide
1
Use for selecting nozzles.
Registration Card
1
Complete and return to Toro.
Predelivery Inspection Form
1
Complete and file in your customer history portfolio.
Removing Existing Bed
1. Start the engine. Engage the hydraulic lift lever and
lower the bed until cylinders are loose in slots. Release
the lift lever and the turn off engine.
2. Remove the lynch pins from the outer ends of the
cylinder rod clevis pins (Fig. 2).
1
5
6
2
3
4
m–7148
Figure 2
1.
Bed mounting plate
2.
Cylinder rod end
3.
Clevis pin
4.
Lynch pin
5.
Rear slots (Full bed)
6.
Front slots (2/3 bed)
