4.
Hold the discharge chute in the straight-ahead position,
pull the lower cable casing downward until you remove
the slack in the cable, and tighten the screw on the
lower cable clamp securely (
Figure 43
).
Figure 43
1.
Lower cable casing
5.
Pull the upper cable casing forward until you remove
the slack in the cable, and tighten the screw on the
upper cable clamp securely (
Figure 44
).
Figure 44
1.
Upper cable casing
Note:
Do not over-tension the cables. If the cables
are over-tensioned, the Quick Shoot will be hard to
operate.
18
Summary of Contents for 38744
Page 20: ...Notes ...
Page 21: ...Notes ...