Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Unfold the handle.
Screw
3
Chute assembly
1
2
Discharge-chute handle
1
Install the discharge chute.
1
Unfolding the Handle
No Parts Required
Procedure
1.
Loosen the handle knobs, pull out the U-shaped handle
locks until you can move the handle freely, and rotate
the handle to the operating position (
Figure 4
).
Figure 4
1.
U-shaped handle lock (2)
2.
Handle knobs
2.
Insert the end of the U-shaped handle lock into the
open hole in the handle and tighten the handle knobs
until they are snug (
Figure 5
).
Note:
The handle knobs contain nyloc nuts that
require more pressure to tighten fully to prevent the
handle from coming loose during operation.
Figure 5
Important:
Ensure that you do not pinch or kink
the control cable (
Figure 6
).
Figure 6
1.
Control cable
4
Summary of Contents for 38744
Page 20: ...Notes ...
Page 21: ...Notes ...
