Toro 38744, Operator'S Manual

Page: 3 / 24

Safety
•
Read and understand the contents of this Operator’s Manual
before you start the engine. Ensure that everyone using
this product knows how to use it and understands the
warnings.
•
Do not put your hands or feet near moving components
on the machine.
•
Do not operate the machine without all guards and other
safety protective devices in place and working on the
machine.
•
Keep clear of any discharge opening. Keep bystanders a
safe distance away from the machine.
•
Keep children out of the operating area. Never allow
children to operate the machine.
•
Shut off the engine before unclogging, servicing, or
fueling the machine.
Safety and Instructional Decals
Important:
Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
94-2577
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
115-5698
Order Part No. 117-9121
1. Cutting dismemberment hazards, impeller and auger—do
not place your hand in the chute; remove the ignition key
and read the instructions before servicing or performing
maintenance.
117-9103
Order Part No. 117-6046
1. Warning—read the
Operator's Manual.
6. Engine switch off
2. Cutting/dismemberment
hazard, impeller—shut off
the engine before leaving
the machine. 7. Primer
3. Thrown object
hazard—keep bystanders
a safe distance away from
the machine. 8. Push the primer 3 times to
prime the engine.
4. Fuel spill hazard—do not
tip machine backward. 9. Read the Operator's
Manual before checking
engine-oil level.
5. Engine switch on 10. Plug the machine in to
power the electric starter.
3