Product Overview
g220002
Figure 12
1.
Handgrip (2)
9.
Discharge chute
2.
Auger/impeller lever
10.
Scraper
3.
Speed-selector lever
11.
Auger
4.
Quick Stick®
discharge-chute control
12.
Skid (2)
5.
Traction lever
13.
Electric-start button
6.
Fuel-tank cap
14.
Electric-start plug-in
7.
Oil-fill tube/dipstick
15.
Snow-cleanout tool
8.
Chute deflector
16.
Headlight
g016500
Figure 13
1.
Primer
5.
Throttle
2.
Ignition switch
6.
Oil-drain plug
3.
Choke
7.
Recoil-start handle
4.
Fuel-shutoff valve
g004217
Figure 14
1.
Snow-cleanout tool (attached to the handle)
Operation
Before Operation
Before Operation Safety
•
For electric-start models only:
Use extension
cords and receptacles as specified in the manual.
Thoroughly inspect the electrical cord before
plugging it into a power source. If the cord is
damaged, do not use it. Replace the damaged
cord. Unplug the power cord whenever you are
not starting the machine.
•
Wear adequate winter garments whenever
you operate the machine. Wear substantial,
slip-resistant footwear that improves footing on
slippery surfaces. Avoid loose-fitting clothing that
can get caught in moving parts.
•
Always wear eye protection during operation or
while performing an adjustment or repair to protect
your eyes from foreign objects that the machine
may throw.
•
Thoroughly inspect the area where you will use the
machine, and remove all doormats, sleds, boards,
wires, and other foreign objects.
•
If a shield, safety device, or decal is damaged,
illegible, or missing, repair or replace it before
beginning operation. Also tighten any loose
fasteners.
8
