Toro 31698, Operator'S Manual, Page: 46 / 100

Periodic Reset Regeneration
If the engine has not completed a successful Reset,
Parked, or Recovery regeneration in the previous 100
hours of engine operation, the engine computer will
attempt to perform a reset regeneration.
Setting the Inhibit Regen
Reset Regeneration Only
Note:
If you set the InfoCenter to inhibit regeneration,
the InfoCenter displays A
DVISORY
#1215 ( Figure 42 )
every 15 minutes while the engine requests a reset
regeneration.
g241829
Figure 42
A reset regeneration produces the elevated engine
exhaust. If you are operating the machine around
trees, brush, tall grass, or other temperature-sensitive
plants or materials, you can use the Inhibit Regen
setting to prevent the engine computer from
performing a reset regeneration.
Important:
When you shut off the engine and
start it again, the inhibit regen setting defaults to
O
FF
.
1. Access the DPF Regeneration menu, and press
buttons 1 or 2 to scroll down to the I
NHIBIT
R
EGEN
option ( Figure 43 ).
g241830
Figure 43
2. Press the button 4 to select the Inhibit Regen
entry (
Figure 43 ).
3. Press the button 4 to change the inhibit
regeneration setting from On to Off (
Figure 44 )
or from Off to On.
g241916
Figure 44
Allowing a Reset Regeneration
The InfoCenter displays the high exhaust-temperature
icon when the reset regeneration is in process.
Note:
If I
NHIBIT
R
EGEN
is set to O
N
, the InfoCenter
displays A
DVISORY
#1215 ( Figure 45 ). Press any
button to set inhibit regeneration setting to O
FF
and
continue with the reset regeneration.
g244939
Figure 45
Note:
If the engine exhaust temperature is too low,
the InfoCenter displays A
DVISORY
#1216 ( Figure 46 ) to
inform you to set the engine to full throttle (high idle).
46