Toro 31698, Operator'S Manual, Page: 47 / 100

g241833
Figure 46
Note:
When the reset regeneration completes, the
high exhaust-temperature disappears from the
InfoCenter screen.
Parked or Recovery Regeneration
•
When the engine computer requests either a
parked regeneration or a recovery regeneration,
the regeneration request icon (
Figure 47 ) displays
in the InfoCenter.
g241834
Figure 47
•
The machine does not automatically perform a
parked regeneration or a recovery regeneration,
you must run the regeneration through the
InfoCenter.
Parked Regeneration Messages
When a parked regeneration is requested by the
engine computer the following messages display in
the InfoCenter:
•
Engine warning SPN 3720, FMI 16 ( Figure 48 )
g243501
Figure 48
•
Parked regeneration required A
DVISORY
#1212
( Figure 49 )
Note:
Advisory #1212 displays every 15 minutes.
g241835
Figure 49
•
If you do not perform a parked regeneration
within 2 hours, the InfoCenter displays parked
regeneration required—power takeoff disabled
A
DVISORY
#1213 ( Figure 50 ).
g241836
Figure 50
Important:
Perform a parked regeneration to
restore the PTO function; refer to Preparing to
Perform a Parked or Recovery Regeneration
(page 49)
and Parked or Recovery Regeneration
(page 47) .
Note:
The Home screen displays the power
takeoff disabled A
DVISORY
#1213 every 15 minutes
until you perform a parked regeneration or the
engine computer requires you to perform a
recovery regeneration.
47