Toro 315000001, Operator'S Manual

Page: 22 / 32

Figure 43
1. Straight-barbed fitting 3. Hose 1.9 x 76 cm (3/4 x
30 inch)
2. Hose clamp
2. Secure the hose to the barbed fitting with a hose clamp
(
Figure 43 ).
3. Assemble the free end of the hose 1.9 x 76 cm (3/4 x
30 inch) over the straight-barbed fitting at the back of
the 4–way valve (
Figure 43 ).
4. Secure the hose to the fitting with a hose clamp ( Figure
43 ).
11
Installing the Hose Between
the Pressure-Filter Assembly
and the 4-Way Valve
Parts needed for this procedure:
1 Hose 1.9 x 61 cm (3/4 x 24 inch)
2 Hose clamp
Procedure
Note:
To insert the barbed fitting into the hose more easily,
apply a light coat of a non-petroleum-based lubricant, such as
vegetable oil to the barbed end of the fitting.
1. Assemble the hose 1.9 x 61 cm (3/4 x 24 inch) over
the 90° barbed fitting at the inboard side of the 4-way
valve (
Figure 44 ).
2. Secure the hose to the fitting with a hose clamp ( Figure
44 ).
Figure 44
1. Hose clamp 3. Hose 1.9 x 61 cm (3/4 x
24 inch)
2. 90° barbed fitting 4. Straight-barbed fitting
3. Assemble the free end of the hose over the
straight-barbed fitting and secure the hose to the fitting
with a hose clamp (
Figure 44 ).
22