Installing the Upper T-fitting and Inlet
Hose
1.
Install the 2 large O-rings into the O-ring grooves at
either end of the hub connector (
)
Figure 38
1.
Retainer
3.
Hub connector
2.
Lower T-fitting (machine)
4.
Large O-rings
2.
Route the inlet and upper T-fitting that you assembled
in
Assembling the Upper T-fitting, Inlet Hose and Ball
Valve Hose (page 19)
as shown in
Figure 39
1.
Inlet hose
3.
Retainer
2.
Upper T-fitting
3.
Install the upper T-fitting onto the hub connector
and secure the fitting and connector with the retainer
(
) that you removed in step
of
the Inlet Hose (page 18)
.
4.
Align the flanged elbow and a the gasket that you
removed Secure the flanged elbow the hose with the
hose clamp (
) that you removed in
of
Removing the Inlet Hose (page 18)
.
Figure 40
1.
Flanged clamp
3.
Flange (pressure filter
head)
2.
Gasket
4.
Flange (90° fitting—inlet
hose)
5.
Secure the inlet hose to the pressure filter head with the
gasket and flanged clamp (
) that you removed
in
of
Removing the Inlet Hose (page 18)
.
20
Summary of Contents for 315000001
Page 29: ...Notes 29...
