Servicing the Carbon Canister
Replacing the Carbon Canister Air Filter
Service Interval:
Every 200 hours
1.
Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
2.
Remove and discard the carbon canister air filter, but
retain the hoses (
).
Figure 20
1.
Carbon canister
2.
Carbon canister air filter
3.
Install the new air filter and the previously removed
hoses.
Replacing the Carbon Canister
Purge-line Filter
Service Interval:
Every 200 hours
Note:
Check the purge-line filter occasionally for dirt. If the
filter appears to be dirty, replace it.
1.
Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
2.
Move the spring-type hose clamps on both sides of the
carbon canister purge-line filter away from the filter
(
).
g018506
1
2
Figure 21
1.
Carbon-canister
purge-line filter
2.
Check valve
3.
Remove and discard the carbon filter (
).
4.
Install a new filter into the hose with the arrow on the
filter pointing toward the check valve and secure it with
the hose clamps (
Servicing the Engine Oil
Note:
Change the oil more frequently when the operating
conditions are extremely dusty or sandy.
Oil Type: Detergent oil (API service SG, SH, SJ or higher)
Crankcase Capacity: w/filter, 2 Liters (67 oz)
Viscosity: See the table below.
Figure 22
21
