7.
After the new pulley assembly is in position, install the
mower deck belt onto the lower pulley.
Figure 2
1.
Pulley nut
3.
Double pulley assembly
2.
Washer
4.
Mower deck
3
Removing the Existing
Anti-Scalp Roller and Bracket
(For 60-inch Decks Only)
No Parts Required
Procedure
1.
Clean the area around the right, rear anti-scalp wheel.
2.
Remove the anti-scalp roller from the bracket by
loosening and removing the flange nut (3/8 inch) and
axle bolt (3/8 x 4-1/2 inch) as shown in
.
3.
Remove the 3 carriage bolts (3/8 x 3/4 inch) and flange
nuts (3/8 inch) securing the bracket to the mower
(
Note:
Save all hardware for later use.
Figure 3
1.
Anti-scalp roller
4.
Carriage bolt (3/8 x 3/4
inch)
2.
Anti-scalp bracket
5.
Flange nut (3/8 inch)
3.
Bolt (3/8 x 4-1/2 inch)
6.
Mower deck
3
