Form No. 3405-720 Rev A
60in and 72in Blower Kit
Groundsmaster
®
360 and 7200 Series Triple Bagger Hopper
Model No. 31212—Serial No. 316000001 and Up
Model No. 31213—Serial No. 316000001 and Up
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Note:
Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
Double pulley assembly
1
Install the pulley assembly.
3
No parts required
–
Remove the existing anti-scalp roller
and bracket (for 60-inch decks only).
Blower hinge
1
Metal template
1
Bolt (3/8 x 1 inch)
3 or 4
4
Locknut (3/8 inch)
3 or 4
Install the blower hinge.
Blower belt
1
5
Spring
1
Route the blower belt into the blower
assembly.
6
Blower assembly
1
Install the blower assembly.
Belt cover
1
Bolt (1/2 x 2-1/2 inches)
1
7
Nut (1/2 inch)
1
Install the belt cover and bolt.
Front guard
1
Back guard
1
Bolt (1/4 x 5/8 inch)
6
8
Nut (1/4 inch)
1
Install the blower guards.
Latch bracket assembly
1
Bolt (3/8 x 2-1/2 inches)
2
Nut (3/8 inch)
2
Latch bracket strap
1
Screw (#10 x 1/2 inch)
2
9
Nut (#10)
2
Install the tube latch.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3405-720* A
