Figure 50
1.
Air gap at 0.81 mm (0.032 inch)
4.
Set the air gap on each plug between the center and
side electrodes to 0.81 mm (0.032 inch).
5.
Install the correctly-gapped spark plugs and tighten
them to 24.5 to 29 N-m (18 to 22 ft-lb). If you cannot
use a torque wrench, tighten the plugs firmly.
6.
Install the spark-plug wires.
Fuel System
Maintenance
Replacing the Fuel-Pump Filter
Service Interval:
Every 400 hours
DANGER
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or explosion
from gasoline can burn you and others and can
damage property
•
Drain gasoline from the fuel tank when the
engine is cold. Do this outdoors, in an open
area. Wipe up any gasoline that spills.
•
Never smoke when draining gasoline, and stay
away from an open flame or where a spark may
ignite the gasoline fumes.
1.
Remove the seat from the traction unit to access the
fuel pump (
g021415
1
Figure 51
1.
Fuel pump
2.
Unplug the wiring-harness connectors from the fuel
pump (
).
3.
Remove the fuel pump assembly and the fuel filter
from the tank (
).
4.
Remove the clamp that secures the fuel-filter hose to
the fuel-pump fitting. Remove the hose from the fitting
(
).
38
Summary of Contents for 30809 Groundsmaster 3500-G
Page 10: ...121 3533 1 Read the Operator s Manual for information on maintenance 10...
Page 50: ...Notes 50...
Page 51: ...Notes 51...