![background image](http://html.mh-extra.com/html/toro/30321/30321_operators-manual_1133844016.webp)
16
5. Check the parking brake adjustment (Fig. 10). Refer to
Checking the Brakes, page 30.
Note: Make sure brake rod is installed in front (F)
mounting hole in idler bracket.
1
2
m–5233
3
Figure 10
1.
Upper control bar
2.
Parking brake lever
3.
Fixed bar
5
Step
Parts needed for this step:
•
2 Hairpin cotter pins
Installing the Hairpin Cotter
Pins and Washers
Unused height–of–cut spacers may be stored on posts and
retained by a hairpin cotter.
1. On the opposite side of the muffler, install unused
washers and hairpin cotter pins into front and rear
height–of–cut pins (Fig. 11).
m-6505
3
2
1
Figure 11
1.
Hairpin cotter
2.
Unused spacers
3.
Height–of–cut post