Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
No parts required
–
Prepare the machine.
Auxiliary valve
1
Bracket
1
Bolts (M8)
3
90-degree fitting (1/2-inch male, 5/8-inch
male)
2
Install the auxiliary valve.
Cover
1
Clip nut
3
Bolts (M6)
3
90-degree fitting (5/8-inch male, male)
2
90-degree fitting (5/8-inch male, 5/8-inch
female)
1
Tee fitting
1
Hydraulic hose (30 inches)
1
Directional valve assembly
1
Bolts (5/16 inch)
2
Washer
2
Install the directional valve cover and assembly.
Short Hydraulic tube
1
Long hydraulic tube
1
Hydraulic hose (24 inches)
1
90-degree fitting (5/8-inch male, 3/4-inch
female)
2
Decal
1
Cable ties
2
Install the hydraulic hoses and the decal.
Preparing the Machine
1.
Move the machine to a level surface.
2.
Set the parking brake and lower the attachments to
the ground.
3.
Shut off the machine and remove the key.
4.
Remove the bolts and cover from the existing bulkhead
mount as shown in Figure 1.
g027024
2
1
Figure 1
1.
Bolts
2.
Cover
2
