7.
Open the fuel shut-off valve; refer to
.
8.
Check for fuel leaks and repair if needed.
9.
Wipe up any spilled fuel.
Electrical System
Maintenance
Servicing the Battery
Service Interval:
Every 100 hours
Always keep the battery clean and fully charged. Use a paper
towel to clean the battery case. If the battery terminals are
corroded, clean them with a solution of 4 parts water and
1 part baking soda. Apply a light coating of grease to the
battery terminals to prevent corrosion.
Voltage: 12 volts
WARNING
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
DANGER
Do not drink electrolyte, and avoid contact with
skin, eyes or clothing. Wear safety glasses to shield
your eyes and rubber gloves to protect your hands.
Battery electrolyte contains sulfuric acid which is a
deadly poison and causes severe burns.
Removing the Battery
WARNING
Battery terminals or metal tools could short against
metal machine components causing sparks. Sparks
can cause the battery gasses to explode, resulting
in personal injury.
•
When removing or installing the battery, do not
allow the battery terminals to touch any metal
parts of the machine.
•
Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
36
Summary of Contents for 23518
Page 53: ...Schematics Electrical Diagram Rev A 53...
Page 54: ...Electrical Schematic Rev A 54...
Page 55: ...Hydraulic Diagram Rev A 55...