•
Cut the edges of the stump for more efficient
grinding. Once your cutting swath is close to 1/4 of
the wheel diameter (), lift the grinder, move forward
and begin cutting on the edge again.
Figure 25
•
Listen to the engine and watch the grinder wheel
speed to maintain the speed of the wheel. Slow
down the head sweep by feathering the joystick as
cutting becomes difficult.
•
As you grind from left to right, most of the debris
will go to the left of the grinder wheel. When you
grind from the right to left, the debris will go to the
right.
•
You may also grind a stump from the side to lessen
turf damage.
20
Summary of Contents for 23210
Page 41: ...Schematics g013418 Electrical Schematic Rev A 41 ...
Page 42: ...g013419 Hydraulic Schematic Rev A 42 ...
Page 43: ...Notes 43 ...