Opening the Rear Access
Cover
1. Unscrew the 2 hand knobs securing the rear access
cover to the machine (Figure 28).
Figure 28
1.
Hand knob
2. Tilt the rear access cover down and remove to access
the internal components (Figure 28).
Closing the Rear Access
Cover
1. Move the rear access cover in place over the back
of the traction unit making sure the tabs line up in
the slots.
2. Push the access cover forward, lining up the hand
knob screws with the threaded holes in the machine.
3. Screw the hand knobs tight to secure the rear access
cover in place.
Removing the Side Screens
1. Open the hood.
2. Slide the side screens (Figure 29) up and out of the
slots in the front screen and frame.
Figure 29
1.
Side screen
Installing the Side Screens
Slide the side screens into place in the slots in the front
screen and frame.
28
Summary of Contents for 22319
Page 7: ...Slope Indicator 7...
Page 49: ...Schematics G007388 Electrical Schematic Rev B 49...
Page 50: ...Hydraulic Schematic Rev A 50...
Page 51: ...Notes 51...
