Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
Cutting unit
1
Inspect the cutting unit
2
No parts required
–
Remove the tipper assemblies
Lift chain
5/7
Chain bracket
5/7
U-bolt
5/7
Nut
10/14
Screw
5/7
Washer
5/7
3
Nut
5/7
Mount lift brackets and chains
4
Kickstand (supplied with traction unit)
1
Use the kickstand when tipping the
cutting unit
5
No parts required
–
Adjust the rear shield
6
No parts required
–
Mount the counter weights
7
Large O-ring
5/7
Install the cutting units.
Media and Additional Parts
Description
Qty.
Use
Parts catalog
1
Operator’s Manual
1
Certificate of Compliance
1
Review the material and save in an appropriate place:
Note:
Determine the left and right sides of the machine
from the normal operating position.
4
