Toro 03763, Installation Instructions Manual

Page: 9 / 24

2. Install the cap as shown in Figure 14 .
g346927
Figure 14
1. Cap 2. Apply Green Loctite 609®
3. If you are installing the groomer at the left side of
the machine, perform the following (
Figure 15 ):
A. Remove the hex-socket screw that secures
the clutch knob to the actuator shaft.
B. Remove the clutch-knob assembly and flip
it over (
Figure 15 ).
C. Assemble the clutch knob to the actuator
shaft with the hex-socket screw.
g298196
Figure 15
1. Hex-socket bolt 2. Clutch-knob assembly
9
Installing the Groomer
Assembly and Optional
Broomer Kit
Groomer and Broomer Kits Come
Separately
Parts needed for this procedure:
20
Bolt (1/4 x 1-1/2 inches)
20 Jam nut
20 Shaft clamp
5 Grooming reel (order separately)
Installing the Groomer Kit
Ordered Separately
Model Number Groomer Kit
03771 18 inch Groomer Blade Cartridge Kit
03772 22 inch Groomer Blade Cartridge Kit
03778
27-inch Groomer Blade Cartridge Kit
03766 18 inch QC Grooming Brush Kit
03767 22 inch QC Grooming Brush Kit
1. Obtain a groomer blade cartridge kit or a brush
kit appropriate for your needs and cutting unit;
refer to the table above.
2. Line up the groomer assembly with the
drive-stub shafts of the groomer drive box and
idler assembly (
Figure 16 ).
9