g037064
Figure 5
1.
Flange-head bolts
2.
Support rod
B.
Install the 2 existing flange-head bolts from
the inside of the cutting unit, and secure
them with the 3/8-inch flange locknuts
(
g037065
Figure 6
1.
Flange-head bolts
2.
Flange locknuts (3/8 inch)
5
Installing the Weight
Bracket and the Groomer
Drive Box
Parts needed for this procedure:
5
Weight bracket
10
Hex-socket, button-head bolt (3/8 x 3/4 inch)
3
Groomer drive box (left drive)
2
Groomer drive box (right drive)
Procedure
1.
Identify the left-drive groomer drive boxes and
the right-drive groomer drive boxes; refer to
g346922
Figure 7
1.
Right (yellow) adapter
3.
Groomer drive box—right
drive
2.
Left (green) adapter
4.
Groomer drive box—left
drive
2.
Secure the weight bracket to the reel using 2
hex-socket, button-head bolts (3/8 x 3/4 inch)
as shown in
.
Note:
Attach the weight bracket to the side of
the reel where you intend to mount the groomer
drive box.
5
Summary of Contents for 03763
Page 21: ...Notes...
