OPTIONS & ALLIED TOOLING − DECO 7/10 − DECO 7a/10a − DECO 7e/10e
300236 en − 02/07
Chap. 10.3.3 /5
10.3 PROGRAMMING OPTIONAL SOCKET 2
10.3.1
Configurating Optional Socket 2
The first thing to do is to configurate Optional Socket 2 over Part Program and
preferably outside the Main Program loop.
10.3.2DO Signals for Configurating Option Socket 2
DO 1770=1:
reverses Input 1 and enables Input 1 signal at 0.
Programming: M800 P1=1770
DO 1771=1:
reverses Input 2 and enables Input 2 signal at 0.
Programming: M800 P1=1771
DO 1772=1:
disables Input 1 and Input 1 signal is not used.
Programming: M800 P1=1772
DO 1773=1:
disables Input 2 and Input 2 signal is not used.
Programming: M800 P1=1773
DO 1775=1:
enables display of Message 2011:
MESSAGE ON OPTION SOCKET.
A message does not affect the Part Program run.
Programming: M800 P1=1775
When you configurate the socket to enable the message: 2011: MESSAGE ON
OPTIONAL SOCKET, this can entail stopping and restarting the program run
automatically:
Numeric control PNC 16TB:
Option: K 9.7 = 1
Numeric control PNC 16i: Option: K 23.1 = 1
Now the appearance of 2011 MESSAGE ON OPTIONAL SOCKET 2 stops the
part program, its disappearance restarts the part program.
DO 1776=1:
enables display of Alarm 2012:
ALARM CLASS 1 OPTION SOCKET.
An Alarm Class 1 stops the program at the end of table.
Programming: M800 P1=1776
DO 1777=1:
enables display of Alarm 1013:
ALARM CLASS 3 OPTION SOCKET.
An Alarm Class 3 stops the program by enforcing axes feeds
at 0, turns off the coolant, the chip conveyor and the spindles.
Programming: M800 P1=1777
DO 1780=1:
selects a new program (table).
Programming: M800 P1=1780
10.3.3Enable Input Check-Function Inside Program loop
M825:
enables check start,
generates 100 ms impulse to enable
check function of inputs on Socket 2.
Note:
Alarms Class 1 and 3 change over to Alarms Class 4 after 10 minutes
and cut off the power to the machine.
Summary of Contents for DECO 7/10
