Tormach, Inc.
P: 608.849.8381 / F: 209.885.4534
tormach.com
TECHNICAL DOCUMENT
Page 6
©Tormach® 2017. All rights reserved.
Specifications subject to change without notice.
TD10246_Tool_Post_Install_0317A
Boring Bar Holder Useage
1.
Insert desired tool into Boring Bar Holder
and lock tool by tightening two hex-head cap
screws (see
Figure 12
).
2.
Move Tool Post lever to the unlocked position
and slide Boring Bar Holder onto the QCTP
dove tail (see
Figure 13
); swing Tool Post lever
down to locked position.
3. To change tools, loosen hex cap screws on
Boring Bar Holder.
4.
Tap both hex-head cap screws with dead-blow
hammer to release tool (see
Figure 14
).
NOTE:
Reducer Sleeve (3/4”-1”), located inside the
Boring Bar Holder, is included.
Figure 12
Figure 13
Figure 14
