INSTALLATION
4. To the edge of the front door that's closest to the left side of the enclosure, attach one door seal with three
M5 × 0.8 - 10 screws.
Figure 27: Door seal attached to the edge of the front door.
5. Repeat Step 4 for the remaining front door.
6. Attach the handles to both front doors with two sets of two M8 x 1.25 - 20 screws and two sets of two M8
flat washers.
Figure 28: Both front door handles attached to the enclosure.
7. Push one square tube plug into the bottom of each door handle.
Page 21
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10711: Installation Guide: 1100MX Enclosure Kit (0522A)