INSTALLATION
3. Attach one floodlight retainer to either side of the lights with two sets of two M5 × 0.8 - 10 screws.
Verify that the floodlight is centered over the opening before hand-tightening the floodlight retainers.
Figure 29: Floodlight attached to the top panel.
Figure 30: Attached floodlight from the inside of the enclosure.
4. Repeat Steps 1 to 3 to install the floodlight on the left side.
5. Connect the short power cable from the Enclosure Cable Kit to the plug on the right floodlight.
6. Connect the long power cable from the Enclosure Cable Kit to the plug on the left floodlight.
7. Route the power cables from the floodlights to the electrical cabinet.
8. Plug the floodlights into the Enclosure Lights outlet on the back of the electrical cabinet.
Page 23
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10711: Installation Guide: 1100MX Enclosure Kit (0522A)
