3
Depending on mounting, the battery strap will not be able to slide through
the slots after the box is mounted. Place a battery into the
Power Armor
Battery Box
and adjust the
Battery Stra
ps into a suitable position on both
sides. Remove the battery and
Battery Mat
before proceeding.
Step 3:
The 2” hole in the front/back panel of the
Power Armor Battery Box
is
used to allow the battery cables to enter the battery box. It can be mounted
towards either the front or back as long as there is sufficient room to open
and remove the
Power Armor Lid.
The A7720R and A7720RS power armor battery boxes may be mounted in
two ways.
Option 1: Universal mounting
Page 4
Option 2: Mounting over the stock angle rails
Page 5
Summary of Contents for A7720R
Page 8: ...7 Figure 3 4 ...
