14
2.4. CD Booting
When you face problems with the DVR program or want to re-install or upgrade the firmware without
entering the DVR Setup menu please take the following steps.
1.
Adjust the DIP Switch located in the rear panel of the DVR to the CD position(Down) and turn
on the DVR power.
2.
Insert the CD containing the DVR Firmware. The name of the Firmware is “DVRSYS” and in
this directory, the following folders must exist.
- CDVR BMP
- FONT
- FW
3.
Firmware installation will proceed automatically once the Firmware CD is inserted. The CD
will eject automatically once the installation is completed.
4.
Take out the CD and adjust the DIP Switch(CD Switch) to the Off position(Up). The DVR will
will automatically re-boot.
5.
Repeat the above procedure if the DVR fails to re-boot.
2.5. USB Flash Drive
•
This DVR supports Hi-Speed USB 2.0 Flash Drives.
- Use of Full Speed USB 2.0 Flash Drives may result in slow backup speed or capture speed.
•
Please note that the USB must be formatted using the DVR Formatting function.
-
Please follow the formatting instructions provided in CONFIGURATION – BACKUP in page33.
Installation
