R
EMOTE
T
ASK
™
A
LPHA
P
ARTS AND
I
NSTALLATION
M
ANUAL
P
RE
-I
NSTALLATION
14
V
ERSION
1.1
4 Pre-Installation
All Caterpillar safety and service procedures and precautions should be
followed during product installation or servicing. In the event of a conflict of
direction, Caterpillar procedures override any procedures found in this manual.
Ensure machine is a safe state for installation or servicing.
Park the
machine in a stable location, engage the parking brake, remove the key, and
disconnect the machine battery. Lock the lift arm safety brace and the cab
support lever before performing any under cab installation steps.
4.1 Prepare the Machine
1. Check Machine Firmware.
Machine ECM firmware must be installed with production
release number 503-7999-00 or later before installing the RemoteTask system.
2. Park the Machine.
Park the machine on a smooth, level surface. Engage the parking
brake.
3. Raise Lift Arms.
Raise the lift arms to allow room to engage the lift arm safety brace.
4. Engage the lift arm safety brace.
Reference the applicable CAT Operation and
Maintenance manual for detailed instructions on engaging the lift arm safety brace.
5. Turn off the engine.
Turn off the machine engine with the in-cab key switch. Remove the
key and exit the cab.
6. Lift the Cab.
Use two 24mm wrenches to remove the two front bolts which secure the
cab. Reference the applicable Cat Operation and Maintenance manual for detailed
instructions on lifting the cab.
7. Disconnect the Battery.
Remove the negative battery cable at the battery.
Summary of Contents for REMOTETASK ALPHA
Page 1: ......
Page 2: ...REMOTETASK ALPHA Parts and Installation Manual V1 1 ...
