R
EMOTE
T
ASK
™
A
LPHA
P
ARTS AND
I
NSTALLATION
M
ANUAL
P
ARTS AND
T
OOLS
7
V
ERSION
1.1
2.2 Safety Messages
Remote control installation requires safety precautions to prevent potential hazards such as
injury, loss of life, or damage to the machine or other property. Be sure to also review the safety
messages in the CAT Operation and Maintenance Manual.
TORC® cannot anticipate every possible circumstance that might involve a potential hazard;
therefore, the warnings in this publication and on the product are not all inclusive. The operator
must be alert to potential hazards and ensure that any operating technique used is safe.
All Caterpillar safety and service procedures and precautions should be
followed during product installation or servicing. In the event of a conflict of
direction, Caterpillar procedures override any procedures found in this manual.
Do Not Modify or Disassemble RemoteTask components or wiring.
Modifications could result in a shock hazard, product damage, or unexpected
operation. Opening, modifying, or repairing the RemoteTask will void any
applicable warranty and could prevent the device from operating properly.
Contact a CAT dealer if repairs or modifications are required.
Ensure machine is a safe state for installation or servicing.
Park the in a
stable location, engage the parking brake, remove the key, and disconnect the
machine battery. Lock the lift arm safety brace and the cab support lever
before performing any under cab installation steps.
Do not operate the machine unless you have read and understand the
instructions and warnings in the Operation and Maintenance manual.
Most
accidents that involve product operation are caused by failure to observe basic
safety rules or precautions. An accident can often be avoided by recognizing
potentially hazardous situations before an accident occurs. The operator should
have the necessary training, skills, and tools in order to perform operation and
safety functions properly.
The operator is responsible for safely operating the remote machine.
Ensure the remote operation area is clearly marked and personnel do not enter
the area during remote operation. Verify site personnel are aware the system
will be operating remotely. Maintain line-of-sight with the machine at all times
during remote operation.
Summary of Contents for REMOTETASK ALPHA
Page 1: ......
Page 2: ...REMOTETASK ALPHA Parts and Installation Manual V1 1 ...
