Torbal AGC100, Instruction Manual

Page: 14 / 76

Instruction Manual - TORBAL AGC Series
CHAPTER 7.
MAIN MENU
Main Menu is used to configure the scale and its weighing modes. Before entering the menu, complete
and clear any active function by pressing the “C” key. To enter the Main Menu press the “MENU” key. Once
the “MENU” key is pressed the scale will display available Menu options. Commands: CALIB , UNIT , MODE ,
AUTO, GLP, PRINT , SET TD and RESET will flash sequentially. To select and enter a desired menu option
press the “T” (YES) key while that menu option is displayed.
Note : Scrolling through the options may be accelerated by manually pressing the  0  (NO) key.
7.1.1.Calibration
When the scale is initially installed, it will automatically calibrate at startup to ensure
accuracy of weighing results. Calibration should be performed periodically or whenever the scale is
moved. You can also configure the scale to calibrate automatically with time and temperature variations.
To calibrate the scale and configure automatic calibration settings follow the steps below.
13