Instruction Manual - TORBAL AGC Series
CHAPTER 6.
WEIGHING
1. To begin weighing, press the power button ( ) to turn the scale on. The scale will initialize, perform
automatic internal calibration and enter the weighing mode. The scale is ready to begin weighing as
soon as the stabilization (
) and center of zero (
) indicators appear on the display
2. When weighing, always place the mass in the middle of the pan. The weighed result may be taken when
the stabilization indicator appears on the display.
6.1.1.Zeroing the scale
1. The scale may be re-zeroed manually to obtain a new “center of zero.” To re-zero the scale manually,
make sure the weight and the stabilization indicator are shown on the display.
2. Re-zero the scale by pressing the zero key
0
.
3. The display will show a dotted line, which indicates the scale is re-zeroing.
10
