TK218 OBD-II GPS Tracker
User Manual
Page11
use “,” to separate the
APN, APN username & APN password.
Example: 111111WWW
:
APN
:
web.gprs.mtnnigeria.net,web,web;
111111WWW:RPT:X;
This is to set the upload time interval. The unit is second, the minimum
value is 10 seconds. The default setting is 20.
Example: 111111WWW:RPT:20;SLP:300
;
(Upload time interval: Engine ON:
20s, Engine OFF:300seconds)
111111WWW:RUN:X;
X=0; is to close down the GPRS;
X=1; is to open the GPRS via TCP
E.g.: 111111WWW
:
RUN
:
1
;
(Open the TCP connection)
111111WWW
You can send 111111WWW to check the GPRS settings.
Default GPRS Setting
The initiated GPRS setting is:
IPN: www.topten-track.com ,
COM:8500
APN:(auto detection)
RPT: 20 seconds
SLP:180
RUN:1
IV. Transmission of CAN-BUS Data
The CAN-BUS data includes 3 types as followings:
Real-time vehicle data
Driving behavior data
Error Code
These data can be sent to tracking platform remotely via GPRS network or
sent via blue-tooth locally. The real-time vehicle data & driving behavior data
can be transmitted automatically on basis of the time interval, while the Error
code can only be sent out after it gets the request command. If the OBD module