Topper 20-209-001, Installation & User Manual, Page: 33 / 48

33
For installation with a standard Primary Shut - Off valve (See Figure 14).
A. Shut off the water at the angle stop valve.
B. Use a wrench to loosen the compression nut on the angle - riser tube/flex line to upper faucet.
C. Install the Primary Shut - Off valve onto the angle stop. Use the wrench to tighten the compres-
sion nut on the Primary Shut - Off valve. Do not overtighten.
D. Reconnect the riser tube to the other end of the Primary Shut - Off
valve. Do not overtighten.
Caution: A longer riser tube assembly will be required if a gentle
loop cannot be made.
(See Figure 13).
E. Fully insert the 1/4” tube into the speed - fit/John Guest - style con -
nection. The new incoming water valve can be swiveled to position
the tubing out of the way.
F. Make sure the Primary Shut - Off valve is off before turning the angle
stop valve on. Check for leaks.
Figure 13:
Flexible Hose Positions
Install the Primary Shut - Off Valve
Figure 14: Installation with Flexible Hoses
Incorrect Correct