15
C30S
5.1- GENERAL INSTRUCTIONS
THE ACTUATOR INSTALLATION CAN BE PERFORMED EXCLUSIVELY BY
COMPETENT AND QUALIFIED TECHNICAL PERSONNEL SATISFYING THE
PROFESSIONAL AND TECHNICAL REQUIREMENTS FORESEEN BY THE LAWS IN
FORCE IN THE COUNTRY OF INSTALLATION.
THE ACTUATOR PERFORMANCE MUST BE SUFFICIENT TO ASSURE THE
CORRECT MOVEMENT OF THE WINDOW. IT IS COMPULSORY TO VERIFY THE
THRUST OR TRACTIVE FORCE ACCORDING TO THE TYPE AND WEIGHT OF THE
WINDOW (PAR. 3.4). IT IS FORBIDDEN TO EXCEED THE LIMITS GIVEN IN TAB. 1
CONCERNING THE TECHNICAL DATA (PAR. 3.3).
THE ACTUATOR INSTALLATION MUST BE PERFORMED EXCLUSIVELY WITH
CLOSED WINDOW OR SKYLIGHT.
BEFORE PERFORMING THE INSTALLATION OF THE ACTUATOR ON HOPPER
WINDOWS, VERIFY THAT ON BOTH SIDES OF THE WINDOW TWO COMPASS
STROKE LIMIT DEVICES ARE INSTALLED IN ORDER TO AVOID THE ACCIDENTAL
FALL OF THE WINDOW.
FOR CORRECT OPERATION OF THE ACTUATOR, THE WINDOW FRAME MUST HAVE
A MINIMUM HEIGHT (DISTANCE OF THE ACTUATOR FROM THE WINDOW OPENING
HINGE) EQUAL TO THE VALUES QUOTED IN TAB. 1.
VERIFY
THE DIMENSION "D": VARIABLE BETWEEN 0 TO 50 mm : FOR TOP HUNG
ASSEMBLY (FIG.6a); FOR BOTTOM HUNG ASSEMBLY (FIG.6b)
THE FITTING SURFACE FOR THE ARS RAPID COUPLING DEVICE MUST BE
PERFECTLY FLAT AND/OR SMOOTH.
CHECK THE ADEQUACY OF THE WINDOW AND THE SUITABILITY OF THE MATERIALS
OF THE WINDOW AND/OR FRAME ON WHICH THE ACTUATOR WILL BE FASTENED. AND
IT MUST ENSURE A GOOD SUPPORT OF THE ACTUATOR-WINDOW ASSEMBLY DURING
THE MOVEMENT.
INSTALLATION -5
INSTALLATION AND USE ISTRUCTIONS
