3.6- USE LIMITS
The actuator has been designed and manufactured exclusively for the destination of
use given in
par. 3.5
, therefore, any other type of use is strictly forbidden in order to
assure in any moment the safety of the installer and of the user, as well as the efficiency
of the actuator itself.
Check carefully all environmental conditions (temperature, humidity, wind, snow,
potential chemical agents, etc.) and installation settings (misaligned fitting of brackets
and attachment to the frame, frictions produced by hinges or gaskets, use of self-
balancing window stays, etc.) it is recommended that they not exceed the actuator
performances shown in the technical table. If they do, please find an alternative and
more suitable product for your application.
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR FOR IMPROPER USES OTHER
THAN THE ONE FORESEEN BY THE MANUFACTURER (SEE PAR. 3.5).
IT IS STRICTLY FORBIDDEN TO INSTALL THE ACTUATOR ON THE EXTERNAL SIDE
OF THE WINDOW FRAME SUBJECT TO ATMOSPHERIC AGENTS (RAIN, SNOW,
ETC.).
THE USE OF THE ACTUATOR IN ENVIRONMENTS WITH POTENTIALLY EXPLOSIVE
ATMOSPHERE IS STRICTLY FORBIDDEN.
IT IS COMPULSORY TO KEEP THE PACKAGE AND THE ACTUATOR OUT OF REACH
OF CHILDREN.
3.7-
PACKAGE
STANDARD
Each standard package of the product (cardboard box) contains
(Fig. 4)
:
No.1 Actuator equipped with power supply cable;
No.1 Window frame connection bracket (Ref. A);
No.1 Bracket for bottom hung opening (Ref. B);
No.1 Small parts package (quick coupling, No.2 bracket fastening lateral screws, No.7
screws AF Ø4.2 x 19 mm for fastening the bracket to the window frame) (Ref. C);
No.1 (2 mm) Allen wrench (Ref. D);
No.1 Installation and use instructions (Ref. E);
No.1 Adhesive drilling template (Ref. F);
No.1 Safety Plate (Fig. 5).
MAKE SURE THAT THE ABOVE DESCRIBED COMPONENTS ARE CONTAINED IN
THE PACKAGE, AS WELL AS THAT THE ACTUATOR HAS NOT BEEN DAMAGED
DURING TRANSPORT.
SHOULD ANY ANOMALY BE DETECTED, IT IS FORBIDDEN TO INSTALL THE
ACTUATOR, AND IT IS COMPULSORY TO REQUIRE TECHNICAL ASSISTANCE FROM
YOUR DEALER OR THE MANUFACTURER.
THE PACKAGING (PAPER, PLASTIC, ETC.) HAS TO BE DISPOSED ACCORDING TO
THE LAWS IN FORCE.
EX
11
C30S
TECHNICAL DESCRIPTION -3
INSTALLATION AND USE ISTRUCTIONS
