4.1-
GENERAL INSTRUCTIONS
OPERATORS MUST BE INFORMED OF ACCIDENT RISKS, SAFETY DEVICES AND
THE GENERAL ACCIDENT PREVENTION REGULATIONS ESTABLISHED BY
INTERNATIONAL DIRECTIVES AND BY THE LAW IN FORCE IN THE COUNTRY OF
U S E. A L L O P E R ATO R S M U S T S T R I C T LY C O M P LY W I T H T H E A C C I D E N T
PREVENTION REGULATIONS IN FORCE IN THE COUNTRY OF USE.
DURING HANDLING AND INSTALLATION OF THE PARTS, THE PERSONNEL SHALL
BE EQUIPPED WITH SUITABLE PERSONAL PROTECTION EQUIPMENT (PPE) SO AS
TO PERFORM THE WORKS REQUIRED UNDER SAFE CONDITIONS.
DO NOT REMOVE OR ALTER THE PLATES PLACED ON THE ACTUATOR BY THE
MANUFACTURER.
IF THE WINDOW FRAME IS ACCESSIBLE FROM OR INSTALLED AT A HEIGHT OF
LESS THAN 2.5 m FROM THE GROUND, AND IF IT CAN BE COMMANDED BY AN
UNTRAINED USER OR WITH A REMOTE CONTROL DEVICE, FIT AN EMERGENCY
STOP SYSTEM WHICH AUTOMATICALLY CUTS IN TO PREVENT THE RISK OF
CRUSHING OR DRAGGING PARTS OF THE BODY INSERTED BETWEEN THE
MOVING AND FIXED PARTS OF THE WINDOW FRAME.
ANY TAMPERING WITH OR UNAUTHORISED REPLACEMENT OF ONE OR MORE
PARTS OR COMPONENTS OF THE ACTUATOR, OR THE USE OF UNORIGINAL
ACCESSORIES AND CONSUMABLES, MAY INCREASE THE RISK OF ACCIDENT
AND THUS RELIEVES THE MANUFACTURER OF ALL CIVIL AND PENAL LIABILITY
EXTRAORDINARY AND ROUTINE MAINTENANCE OPERATIONS INVOLVING THE
TOTAL OR PARTIAL DISMOUNTING OF THE ACTUATOR MAY ONLY BE PERFORMED
AFTER DISCONNECTING IT FROM THE POWER SUPPLY.
THIS APPLIANCE MAY NOT BE USED BY PERSONS (CHILDREN INCLUDED) WITH
REDUCED PHYSICAL, SENSORIAL OR MENTAL CAPACITIES, OR INEXPERT
PEOPLE, UNLESS THEY ARE SUPERVISED AND TAUGHT HOW TO USE IT BY A
PERSON RESPONSIBLE FOR THEIR SAFETY. CHILDREN MUST BE CONTROLLED
TO MAKE SURE THEY DO NOT PLAY WITH THE APPLIANCE.
4.2- SAFETY DEVICES
4.2.1- PROTECTION AGAINST ELECTRIC HAZARD
The actuator is protected against electric hazard due to direct and indirect contacts.
The protection measures against direct contacts aim at protecting people against
hazards due to contact with active parts, usually live parts; while the protection
measures against indirect contacts aim at protecting people against hazards due to
conducing part, which are usually insulated, but could become live in case of failure
(insulation failure).
SAFETY -4
C30S
13
INSTALLATION AND USE ISTRUCTIONS
