TOPP C240, Installation And Use Instructions Manual

Page: 16 / 76

Tab 1 shows the technical data that makes up actuator C240.
Fig.2a and Fig.2b show the names of the main parts that make up the actuator.
3.2 DESCRIPTION OF PARTS AND THEIR DIMENSIONS
3.3
TECHNICAL DATA
(1)
Service of limited duration according to EN 60034
(2)
It is not possible to connect actuators from different manufacturers.When in doubt contact
Customer Service TOPP
16
INSTALLATION AND USE INSTRUCTIONS EN C240
Supply voltage
Absorption
Power absorbed in load
Maximum load in thrust
Maximum load in traction
Speed of movement on empty
Duration of the max idle stroke
Protection against electric shocks
(1)
type of service Sz
Degree of electrical protection
Working temperature
Regulation of connection to window
Connection in parallel of several actuators
on the same window
Weight of device including brackets
Connection in parallel of several actuators
on different windows
Electronic limit switch on opening and ammetric absorption on closure
230V ~ 50Hz
0,22 A
46 W
300 N
100 N
8 mm/s
46 s
Classe II
4 minutes
IP 30
-5°C ÷ +50°C
(2)
Yes
(see wiring diagram)
from 3,90 Kg (L=1200mm) to 7,00 Kg (L=2400mm)
C240/24V
MODEL
24 V
0,75 A
18 W
7,5 mm/s
48 s
Classe III
C240L/24V
Actuator length 1200÷4000mm
24V
0,75 A
18 W
7,5 mm/s
48 s
Classe III
C240L/230V
1200÷4000mm
400 N
300 N
4 minutes
IP 30
300 N
100 N
1200÷4000mm
4 minutes
IP 30
230V ~ 50Hz
0,22 A
46 W
400 N
300 N
8 mm/s
46 s
Classe II
4 minutes
1200÷4000mm
C240/230V
IP 30
No
No
For the actuator mounting types, see figures of par. 8
Stroke
360mm 360mm 360mm 360mm
Tab. 1