TMW
SERIES
INTRODUCTION
For the TMW-9161 series, there are several types of clip microphones are included in this product
range, please make sure that the proper microphone has been selected for your typical sound
reinforcement system before installation.
Last but not the least, the operating frequency of this system may be varied from 798 MHz to 827 MHz, please
refer to your national EMC regulations to pick out the authorized frequency band (0 ~ F) for your end application.
HM-38, Condenser Microphone
Preset impedance:
600 ohm;
Freq. response:
80-12 kHz;
Sensitivity:
-68 dB+/-3 dB at 1 kHz;
Directional:
Uni-directional;
Weight:
52 g (0.12Ib)
HM-58, Condenser Microphone
Preset impedance:
700 ohm;
Freq. response:
200-8 kHz;
Sensitivity:
-65 dB at 1 kHz;
Directional:
Uni-directional;
Weight:
54 g (0.12Ib)
FEATURES
PLL UHF DIVERSITY RECEIVER
Pressing the flip switch to switch channel for desired Radio Frequency
LED indication RF
One receiving module
AF level display
one balanced output
one squelch control
one volume control
Soft touch painting for comfortable use
Channel frequency adjusted manually
TRANSMITTER
COMMON FEATURES
PLL synthesized design
Consistent operating frequencies to comply with the EMC regulations
16 channels frequency presets
Manufactured under ISO9000:2000, ISO/TS16949:2002 Quality Management System
TMW
SERIES
