TMW
SERIES
CONTROL ELEMENTS
3. Power LED
When the unit is turned on, this LED lights up.
4. Band Selector
With an adjusting bar, the band selector can be used to switch to an expected frequency. Before switching
frequencies, turn off the microphone first and then turn on it.
4.3 BODY PACK TRANSMITTER
5. Adjusting Bar
This adjusting bar is placed in the microphone. It is used to adjust squelch control and band selector for
switching frequencies.
6. Antenna
The antenna is integrated into the transmitter body for transmitting signals.
7. Battery Compartment
This unit may be powered from one pair dry or rechargeable batteries, size AA 1.5 V.
1. Power Switch
Set the power switch in the position "ON", then the microphone is turned on and the BATT LED flashes once.
Set the power switch in the position" OFF", then the microphone is turned off and the BATT LED lights off slowly.
2. MINI 4P Connector
This connector is used to connect the unit with the clip microphones, for example, HM-38 or HM-58 condenser
microphones.
Pin1
Pin2
Pin 1 GND
Pin 2 Phantom power supply for condenser microphone
Pin 3 For guitar, bass and keyboards
Pin 4 For dynamic or condenser microphone
Pin4
Pin3
3. Battery Compartment
This unit may be powered from one pair dry or rechargeable batteries, size AA 1.5 V.
4. Belt Clip
It is the detachable belt clip for easy carry during the live applications.
TMW
SERIES
T
M
W
-9
1
6
1
(3) (6) (7)
(8)
(9)
(5)
(4)
(2) (1) (10)
