TOPIC-LIGHT SpaceLas DP3RGB, User Manual

Page: 4 / 13

4
.
SAFETY NOTES
WARNING! This projector is a Class 4 laser product. It must never be used for audience-scanning
applications. The output beam of the projector must always be at least 3 meters above the floor in the
audience. See the Proper Operation section for further information.
Please read the following notes carefully! They include important safety information about the
installation, usage, and maintenance of this product.
■Keep this User Manual for future consultation. If you sell this product to anotheruser, be sure that they
also receive this document.
■Always make sure that the voltage of the outlet to which you are connecting this product is within the
range stated on the decal or rear panel of the product.
■Product is not designed for use outdoors in adverse weather conditions. To prevent risk of fire or shock,
do not expose this product to rain or moisture.
■Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces. Be sure that no ventilation slots are blocked.
■Always disconnect this product from the power source before cleaning it or replacing the fuse.
■Make sure to replace the fuse with another of the same type and rating.
■If mounting it overhead, always secure this product to a fastening device using a safety chain or cable.
■In the event of a serious operating problem, stop using the projector immediately. Never try to repair the
unit except in a controlled environment under trained supervision. Repairs carried out by unskilled people
can lead to damage or malfunction of the unit, as well as exposure to dangerous laser light.
■Never connect this product to a dimmer pack.
■Make sure the power cord is not crimped or damaged.
■Never disconnect the power cord by pulling or any moving part. Always use the hanging/mounting bracket
or the handles. Or tugging on the cord.
■Never carry a product from the power cord.
■Always avoid eye or skin exposure to direct or scattered light from this product.
■Lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is
possible if lasers are used incorrectly. Pay close attention to each safety REMARK and WARNING
statement in this user manual. Read all instructions carefully BEFORE operating this device.
■Never intentionally expose yourself or others to direct laser light.
■This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
■It is illegal and dangerous to shine this laser into audience areas, where the audience or other
personnel could get direct laser beams or bright reflections into their eyes.
■It is a US Federal offense to shine any laser at aircraft.
■No service allowed by customer. There are no user serviceable parts inside the unit. Do not open the
housing or attempt any repairs yourself.
Service is only to be handled by the factory or authorized factory trained technicians.
■Product is not to be modified by the customer.
■
Caution use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
-
2
-