TOPIC-LIGHT SpaceLas DP3RGB, User Manual

Page: 7 / 13

8. REMOTE INTERLOCK / REMOTE E-STOP BOX
1. If you do not use E-stop box, please insert the white RJ45 plug (shunt) to the projector.
(Refer photo below)
2. Connect the remote E-stop box to any of the RJ45 connector (Remote lock) on the rear of the
projector using Ethernet cable. Ensure that the other end of the cable is firmly attached to the E -
stop box.
REMOTELOCK
Insert the white RJ45 plug
to the projcctor
1 2
9
.
RIGGING
•Be sure that the structure onto which you are mounting this product can support its weight.
•Mount the product securely. You can do this with a screw, a nut, and a bolt. You may also use a
mounting clamp if rigging this product onto a truss. The U-shaped support bracket has three
mounting holes which may be used to secure the clamps to the projector.
•When mounting this product overhead, always use a safety cable.
• Always consider ease of access to the unit before deciding on a location for this product
15mm
-
5
-