LED ZOOM
5
Press the “MODE” then press the “ENTER” to begin your setting. Press “UP” and “DOWN” to switch the
modes with the shining Function Code. Be sure to press the “ENTER” button to save your changing, it
won’t be saved if the button has not been pressed. Moreover, the saving data still exists even after power
off and then on.
MASTER SLAVE MODE SETTING
C
1
D
0
0
1
F
0
0
0
A
H
O
2
8
_
C
U
2
5
5
A
D
A
H
O
A
S
L
——>SLAVE MODE
The machine only accept the signal that send from host-machine, it won’t accept
the signal from the console.
——>Press “MODE” -> “Enter” and Press UP/Down button to setting.
Press “Enter” to confirm the DMX condition and forbid the Master Slave
Mode.
——>
DMX ADDRESS SETTING
“D”: Function Code
“001”: DMX Address
——>
Temperature setting
“C”: Function Code
“28”: Show temperature of LED PCB
——>
DMX AMOUNT SETTING
“C”: Function Code
“1”: Channel amounts
——>SINGLE COLOR SETTING
“U255”: 0-255 setting for white color
——>
SINGLE MODE SETTING, work only on the situation of
“F”: Function Code
“000”: Function number
——>The machine will send signal to all connected slave-machines.
PAR64 COB 200W 3200K IP X4
