Topfloor TF90VB-TRS, Operator'S Manual, Page: 15 / 24

TF90-TRS 13
5.9 Side brush replacement
5.9.1 Removing the side brushes
Park the sweeper on level ground that has been designated (assigned)
for this purpose.

Turn off the sweeper (all actuators).

Make sure the sweeper has been secured from rolling away by ac-
cident.

Lift the side brushes.

Reach under the side brushes.

With your fingers squeeze together the snap-in fixtures in the centre
of the side brush retainer.

With a downward motion, pull off the side brushes.

Replace the side brushes.
5.9.2 Mounting the side brushes

Position the side brushes under the side brush retainers.

Turn the side brushes until the bore holes of the side brush disk line
up with the pins of the side brush retainer.

Push the side brushes into the side brush retainers until you feel the
side brushes lock into place.